Lenker-Style 10-foot Direct Reading Laser Grade Rod

LaserLine Lenker-Style 10 ft. Laser Rod:  

Direct Reading/True Elevation Grade Rod

Direct Reading, or True Elevation (also known as Lenker style) is a Grade Rod with a moveable tape face
allowing you to set the actual benchmark elevation, or any elevation, above or below the bench into the
rod. The actual true elevation above sea level is read on these rods, thus eliminating errors caused by adding
or subtracting. Since no math is involved, grade shots are much faster than conventional style rods.
On most jobsites, the bench elevation is typically established by survey, and all elevations on that project are
above that or below primary bench elevation.

Laser Version Direct Reading/ True Elevation Rods

For use with a laser detector. There is a special rail slide and Laserline detector bracket that lets the laser detector travel the full working length of the rod. This allows faster and easier readings because it takes the awkwardness out of having to loosen the detector, move the detector, then tighten the detector for each reading.

Optical Version Direct Reading/ True Elevation Rods

Are used with optical instruments and have no special rail for the laser detector. All tape faces have large scales and are easy to read at a distance when using an optical instrument.

GR1000 SERIES

GR 1000

• 10 Foot Direct Reading
• Feet, Tenths, Hundredths
• Plus Cut & Fill
• 5' 10.5" - 10' 1.75"

GR 1000T

• 10 Foot Direct Reading
• Feet, Tenths, Hundredths
• 5' 10.5" - 10' 1.75"

GR 1000I

• 10 Foot direct reading
• Feet & Inches
• 5' 10.5" - 10' 1.75"

GR 10001CF

• 10 Foot Cut & Fill only
• Inches
• 5' 10.5" - 10' 1.75"